Distribution Requirements Planning in Acumatica: What It Does and Who Should Be Using It

What Is Distribution Requirements Planning (DRP)?  

Distribution Requirements Planning is a time-phased inventory planning method used by wholesale distributors to coordinate purchasing, warehouse transfers, and kit assembly across multiple locations. In Acumatica, DRP generates supply recommendations based on actual sales orders, demand forecasts, vendor lead times, and safety stock levels, updated each time a full regeneration runs. 

Not sure if DRP is the right next step for your operation? Download the DRP Readiness Checklist and find out in 10 minutes. 

The Planning Problem That Doesn’t Look Like a Planning Problem 

Distribution Requirements Planning, or DRP, is one of the least-used capabilities inside Acumatica’s distribution module. Most wholesale distributors running the platform have it available. Most aren’t using it. 

Ask a distribution operations manager how they decide what to order and when, and you’ll get some version of the same answer: a mix of Acumatica data, a spreadsheet, tribal knowledge, and experience. 

That approach works until it doesn’t. It fails when demand shifts faster than the spreadsheet refreshes. It fails when a planner leaves and takes the logic with them. And it fails when the business adds a second or third warehouse location and the manual coordination required to balance stock across sites exceeds what any one person can track. 

The root issue isn’t the spreadsheet. It’s that Acumatica’s native Inventory Replenishment feature, which most distributors set up during implementation, is designed for a specific job: restocking stable, high-volume items based on minimum and maximum thresholds. When demand is irregular, when items are kitted or assembled, or when supply needs to flow across multiple warehouse locations, Replenishment reaches the edge of what it was built to do. 

That’s where distribution requirements planning picks up. 

 

What DRP Is, and What It Isn’t 

There are three distinct planning tools inside Acumatica: Inventory Replenishment, DRP, and Material Requirements Planning (MRP). They serve different operations and they are not interchangeable. 

Inventory Replenishment is trigger-based. When stock falls below a reorder point, it fires a suggested order. It’s ideal for predictable, high-velocity SKUs where demand is consistent enough that a static minimum makes sense. Setup is simple, maintenance is low, and it handles the routine restocking that makes up the majority of most distribution catalogs. 

MRP is designed for manufacturers. It starts with a finished goods demand plan and works backward through bills of materials to drive purchase orders, production orders, and component requirements. If you’re not manufacturing, MRP is not your tool. 

DRP sits in between and is specifically built for wholesale distributors. It answers a different set of questions than Replenishment does: 

  • Not just “what’s below the reorder point?” but “what do I need to order, in what quantity, by what date, from which supplier, to meet demand across all my locations over the next 30, 60, or 90 days?” 
  • Not just reorder triggers, but time-phased recommendations that account for vendor lead times, safety stock, demand forecasts, open orders, and scheduled receipts simultaneously. 
  • Not just site-level visibility, but coordinated supply planning across your entire warehouse network, including transfer recommendations that move stock from locations with surplus to locations with shortfalls. 

The simplest way to frame it: Replenishment tells you when you’re low. DRP tells you what to do about it before you get there. 

 

How Distribution Requirements Planning Works Inside Acumatica 

DRP in Acumatica runs a full regeneration of your inventory plan on demand. When you trigger a DRP run, Acumatica eliminates all existing planned orders and recalculates from current state: on-hand balances, open purchase orders, open transfer orders, firm sales orders, and any demand forecasts you’ve loaded into the system. 

The output is a time-phased inventory plan displayed in the DRP screen, organized by item and warehouse, showing demand, supply, projected available balance, and recommended actions across user-defined time buckets (daily, weekly, or monthly depending on how you configure it). 

What makes DRP operationally useful is what happens after the run. 

Exception Messages 

DRP doesn’t ask planners to review every item every day. It surfaces only the decisions that require human attention through exception messages. These include: 

  • Move in: An existing purchase or transfer order should be expedited because demand has moved earlier than the order is scheduled to arrive. 
  • Move out: An existing order should be deferred because demand has shifted later, and receiving early creates unnecessary carrying cost. 
  • Cancel: An order is no longer needed because the demand it was planned to cover has been canceled or consumed. 
  • Expedite: An item has demand within the vendor’s stated lead time, and a normal-priority order won’t arrive in time. 
  • Available transfer: Demand at one warehouse can be filled from available stock at another location before triggering a new purchase order. 

This “manage by exception” model is what compresses planning time. A planner managing 2,000 SKUs across three locations doesn’t review 2,000 items. They review the 40 exception messages that actually require a decision. 

Demand Time Fence 

One of the more nuanced controls in DRP is the demand time fence. This setting defines a window of time, measured from the current planning date, during which DRP ignores forecasts and plans exclusively from confirmed sales orders. 

Why does this matter? Because in the near term, confirmed orders are more accurate than forecasts. A forecast for the next two weeks is almost always less reliable than the sales orders already in the system for that period. The demand time fence prevents the planning engine from double-counting demand by mixing confirmed orders with forecast demand for the same window. 

Beyond the time fence, DRP uses whichever is greater: the forecast or actual demand. This logic lets distributors plan confidently for longer horizons without distorting near-term recommendations. 

Grace Period 

The grace period setting addresses a common planning noise problem: items that were just received but may not have fully processed into on-hand balances yet. By defining a grace period, planners tell DRP to treat recently received supply as available for demand coverage even if the inventory transaction hasn’t fully posted. This prevents DRP from generating redundant purchase recommendations for inventory that is physically in the warehouse. 

Kit Assembly Planning 

For distributors who build kits or bundles, DRP handles both the finished assembly and the component supply in a single planning run. When DRP identifies demand for a kit, it generates a suggested kit assembly and simultaneously drives purchase order and transfer order recommendations for every component required. Planners see the full picture from one screen without manually translating finished goods demand into component requirements. 

Multi-Warehouse Coordination 

DRP plans across all warehouse locations simultaneously. When it identifies a shortfall at one location and surplus at another, it recommends a warehouse transfer before suggesting a new purchase order from a vendor. This sequencing, transfer-before-purchase, can meaningfully reduce procurement costs for distributors with multiple stocking locations. 

 

Who Should Be Using DRP 

Not every Acumatica distribution client needs DRP. Replenishment handles a large portion of what most catalogs require. The question is whether your operation has characteristics that push beyond what Replenishment was designed for. 

Operational Characteristic 

Recommended Tool 

High-volume, stable-demand SKUs with predictable reorder cycles 

Inventory Replenishment 

Irregular or seasonal demand patterns 

DRP 

Kit assembly or bundle operations 

DRP 

2+ warehouse locations requiring coordinated replenishment 

DRP 

Items where vendor lead times vary or are long 

DRP 

Demand planning driven by sales forecasts, not just order history 

DRP 

Mix of stable and complex items across the same catalog 

Both (Replenishment for simple items, DRP for complex) 

The last row is worth emphasis. Acumatica supports running both tools simultaneously. Replenishment handles the routine, high-volume SKUs that don’t need planner attention. DRP handles the items that require judgment, timing precision, or cross-location coordination. Most mid-sized distribution operations land in that combined model. 

 

What Planners Actually Experience 

The practical difference between planning with Replenishment only versus adding DRP shows up in how planners spend their time. 

With Replenishment only, planners spend significant time reconciling Acumatica data with external spreadsheets to build a forward-looking picture. Reorder decisions for complex items require manual calculation of lead times, open orders, and projected demand. Multi-warehouse coordination happens over email or phone. 

With DRP active, planners run a regeneration at the start of each planning cycle, review the exception message queue, act on the decisions that need human judgment, and release the planned orders that are straightforward. The system does the calculation work. The planner does the decision work. 

That shift has a measurable impact. Distributors who move from manual planning or Replenishment-only models to DRP consistently report reductions in both rush order frequency and excess inventory carrying costs, because the planning horizon extends and decisions are made earlier in the supply cycle when more options are available. 

 

A Note on Forecasting in DRP 

DRP can run on one of two inputs: actual sales order demand, or a combination of sales orders and demand forecasts. For distributors with seasonal patterns, long vendor lead times, or blanket sales order relationships with customers, loading forecasts into Acumatica and incorporating them into DRP runs is what extends the planning horizon beyond the current order book. 

Acumatica supports calculated forecasts based on transaction history, manual forecast entry, and imported forecasts from external planning tools. Forecast data in DRP is consumed as sales orders arrive, so planners can track which portion of the forecast has been covered by actual orders in each planning period through the side panel comparison view. 

This is the operational lever that lets distributors move from reactive purchasing to proactive purchasing. It requires a forecasting discipline that not every team has in place at go-live, but it’s worth building toward if your business has meaningful demand variability. 

 

How to Know If DRP Is the Right Next Step for Your Operation 

If your planning team is spending significant time every week manually deciding what to order beyond what Acumatica’s Replenishment suggestions produce, DRP is likely already the right tool. The question is whether the configuration investment to activate and tune it pays back in planner time and inventory position improvement. 

The answer depends on three factors: 

  1. Catalog complexity. More SKUs with variable demand, longer lead times, or kit dependencies increase the return on DRP. 
  1. Warehouse count. Each additional stocking location multiplies the coordination problem that distribution requirements planning is designed to solve. 
  1. Planning cycle length. Businesses that need to plan 60 to 90 days out get more value from DRP’s time-phased structure than businesses where a two-week planning horizon is sufficient. 

If any of those three factors describe your operation, it’s worth a conversation about where you are in using Acumatica’s planning capabilities and what a DRP activation would require. 

Frequently Asked Questions: Distribution Requirements Planning in Acumatica 

What is the difference between DRP and Inventory Replenishment in Acumatica? Inventory Replenishment is trigger-based: when stock drops below a minimum, it fires a suggested order. Distribution Requirements Planning is time-phased: it calculates what to order, in what quantity, from which supplier, by what date, across all warehouse locations simultaneously, based on actual demand and forecasts. Replenishment handles routine restocking. DRP handles complex, multi-location, or kit-based inventory planning. 

When should a wholesale distributor activate DRP in Acumatica? DRP is the right tool when an operation manages two or more warehouse locations, builds kits or bundles, has seasonal or irregular demand, or when planners are spending significant time each week reconciling Acumatica data with external spreadsheets to make reorder decisions. If any of those conditions apply, DRP is likely already available in the license and worth activating. 

How do DRP exception messages work in Acumatica? After each DRP regeneration, Acumatica surfaces only the items that require a planner decision rather than requiring review of every SKU. Exception messages flag orders that should be moved earlier, deferred, canceled, or expedited based on updated demand and supply data. A planner managing 2,000 SKUs across three locations typically reviews 30 to 50 exception messages per cycle, not 2,000 line items. 

Can Acumatica DRP and Inventory Replenishment run at the same time? Yes. Acumatica supports running both tools simultaneously. Replenishment manages high-volume, predictable SKUs that don’t need planner attention. DRP manages items that require timing precision, cross-location coordination, or forecast-driven planning. Most mid-sized distribution operations use both, assigning each item class to the method that fits its demand pattern. 

 

Next Step 

Crestwood Associates has delivered ERP implementations to mid-market distributors since 1998 and holds Gold Certified Partner status with Acumatica. Our customer success team works with existing Acumatica clients to evaluate planning configuration, identify gaps between current usage and available capability, and support the process changes required to operationalize tools like DRP effectively. 

If your planning process relies on anything outside Acumatica to make replenishment decisions, that’s a useful place to start the conversation. 

This post is the second in a series on Acumatica’s native planning capabilities. The first, A Practical Guide to MRP, DRP, and Inventory Replenishment in Acumatica, covers how all three tools are designed to work together and outlines the best practices Crestwood sees across successful planning environments.  

Author

  • Chloe

    Senior Marketing Manager & Partnerships Leader at Crestwood Associates | MBA Candidate, University of Miami | ERP, AI & Business Applications GTM Strategy

Share the Post:

Related Posts

A Shield CompanyBack to top